Mechanical Control
Removable Door Gaskets
Adjustable Shelves Vinyl-Coated Steel
Self-Closing Swing Doors
KCGM24R / 738008
Fin & Tube Condenser improves performance in high temperature environments
Automatic Defrost Cooling System provides worry-free performance
1/3 HP Compressor
Painted Steel/Painted Aluminum Exterior & Interior
Mechanical Control
Removable Door Gaskets
Adjustable Shelves Vinyl-Coated Steel
Self-Closing Swing Doors
Heavy Duty Casters Included
Broiler interior
– Front chute for easy loading of wood or charcoal
– Built-in gas log lighter, no lighter fluids or electric starters needed
– Open grate bottom for optimized air-to-fuel combustion
– Optimized combustion saves wood and charcoal
– Any type of wood or charcoal may be used
“H” style burner system
– Burner may be used to start up wood during peak periods
– One 20,000 BTU (6 KW) burner for 30″ (762 mm) width
– One 25,000 BTU (7 KW) burner for 36″ (914 mm) width
– One 30,000 BTU (7 KW) burner for 48″ (1219 mm) width
– Two 20,000 BTU (6 KW) burners for 60″ (1524 mm) width
– Removable for cleaning, no tools required
Infra-red burner
– Burner provides instant, even heating
– 40,000 BTU (12 KW) ISB-36 model
– 20,000 BTU (6 KW) ISB-24 model
– Protective screen over infra-red burner
– Individual left / right gas controls “ISB-36” model
– Adjustable gas valve
– Continuous pilot for instant ignition
Broiler grid
– Spring balanced
– Raises and lowers with locking in 4 positions
– Rack assembly rolls out 10″ (254 mm)
– Loads and unloads easily
– Large capacity
– Removes easily for cleaning
Filtering saves money
– Reduces product spoilage and waste
– Reduces operating costs
– Improves product consistency
– Improves quality output
Filter package choices
– Up to six fryers can be batteried into one fryer / filter system
– Available for 50 and 75 lb. (27 and 41 Liters) oil capacity fryers
– Available with Snap Action Thermostat, Electronic Thermostat or Computer Control
Burner system
– High production “H” style burners
– 50,000 BTU (15 KW) per burner on 36″ (914 mm) deep models
– 40,000 (12 KW) BTU per burner on 27″ (686 mm) deep models
– Burner located every 6″ (152 mm)
– Assures even heat distribution for fully cooked chickens
– Fast heat recovery
Round rod cooking grate
– Non-stick grate
– Designed specifically for chicken
– Large broiling surface
– 36″ and 27″ (914 x 686 mm) grate depths available
– 48″ and 60″ (1219 x 1524 mm) widths available
– Removes for cleaning
Burner system
– 15,000 BTU (4 KW) stainless steel burners
– Burners located every 6″ (152 mm)
– Cast iron radiants for maximum heat retention
– Intense surface temperatures
Three bar grate top
– 3″ x 21″ (76 x 533 mm) sections
– Reinforced cast iron construction
– Each top grate blade has a cast-in grease gutter
– Remove for cleaning
Drip Pan
– Full width drip pan
– Removes easily for cleaning
Burner system
– 15,000 BTU (4 KW) stainless steel burners
– Burners located every 6″ (152 mm)
– Cast iron radiants for maximum heat retention
– Intense surface temperatures
Three bar grate top
– 3″ x 21″ (76 x 533 mm) sections
– Reinforced cast iron construction
– Each top grate blade has a cast-in grease gutter
– Remove for cleaning
Drip Pan
– Full width drip pan
– Removes easily for cleaning
Tube fired fryers
– Large heat transfer area heats oil quickly
– Produces a better tasting product
– Less oil absorption
– Fast recovery to desired temperature
– 140,000 BTU (41 KW) total output
Large cool zone
– Captures particles
– Holds particles out of the fry zone
– Reduces taste transfer
– Frypot has a 50 lb. (27 L) oil capacity
Immersed Elements
– Immersed elements are a lower cost electric alternative
– Elements located inside the stainless steel frypot, below fry zone
– 19 KW total output
Large cool zone under element
– Captures particles under element
– Holds particles out of the fry zone
– Reduces taste transfer
– Frypot has a 75 lb. (41 L) oil capacity
Tilt-up element style
– Tilt-up elements provide full access to the frypot for cleaning
– Elements located inside the stainless steel frypot, below fry zone
– 18 KW total output
Large cool zone under element
– Captures particles under element
– Holds particles out of the fry zone
– Reduces taste transfer
– Frypot has a 75 lb. (41 L) oil capacity
Radiant broiler features
– Individually controlled 15,000 BTU/hr. (4 KW) burners
– Stainless steel burners located every 6″ (152 mm)
– Removable reinforced cast iron radiants prevent clogging and provide even broiling
– Cast iron top grates provide attractive char-broiler markings
– Slanted cooking surface provides a range of cooking temperatures
– Full width grease gutter
– Large capacity removable drip pan
Grate sections
– 3″ x 22″ (76 x 559 mm) sections remove easily and safely for cleaning
– Each top grate blade has a cast-in grease trough
– Trough directs excess fat to the front grease gutter minimizing flare-up
PyroCentric™ Burner heads are standard
– Two rings of flame for even cooking no matter the pan size
– PyroCentric™ 32,000 BTU (9 KW) anti-clogging burner with a 7,000 BTU/hr. (2 KW) low simmer feature
Lift-off front grates
– 12″ x 11″ (305 x 279 mm) size
– Heavy-duty cast iron construction
– Anti-clogging pilot shield protects the pilot from grease and debris
– Grate actually provides the shield
– Pots slide easily from section to section and onto the landing ledge
– 12″ x 12″ (305 x 305 mm) size for Step-up Range models
Lift-off backgrates
– 12″ x 13″ (305 x 330 mm) size back grate
– Sized for positioning large stock pots directly over burner
– Features a hot air dam that deflects heat onto the stock pot, not the backguard
– 12″ x 12″ (305 x 305 mm) size for Step-up Range models
Tube fired fryers
– Large heat transfer area heats oil quickly
– Produces a better tasting product
– Less oil absorption
– Fast recovery to desired temperature
– 105,000 BTU (31 KW) total output
Large cool zone
– Captures particles
– Holds particles out of the fry zone
– Reduces taste transfer
– Frypot has a 40 lb. (22 L) oil capacity
Tube fired fryers
– Large heat transfer area heats oil quickly
– Produces a better tasting product
– Less oil absorption
– Fast recovery to desired temperature
– 175,000 BTU (51 KW) total output
Large cool zone
– Captures particles
– Holds particles out of the fry zone
– Reduces taste transfer
– Frypot has a 75 lb. (41 L) oil capacity
Tilt-up element style
– Tilt-up elements provide full access to the frypot for cleaning
– Elements located inside the stainless steel frypot, below fry zone
– 15.5 KW total output
Large cool zone under element
– Captures particles under element
– Holds particles out of the fry zone
– Reduces taste transfer
– Frypot has a 50 lb. (27 L) oil capacity
Tube fired fryers
– Large heat transfer area
– Millivolt temperature control circuit
– Snap acting thermostat has a 200° F – 400° F (93° C-204° C) temperature range
– Heats oil quickly
– Better tasting product
– Less oil absorption
– Fast recovery to desired temperature
– 140,000 BTU (41 KW) total output
-100% safety shut-off
Reviews
There are no reviews yet.