Exterior and Interior Stainless Steel
Dixell Digital Temperature Control System
Heavy Duty Embraco Compressor
Self-closing and Stay open Door
Efficient Refrigeration System
Round Corner Design
Recessed Door Handle
Pre-installed Castors and Shelves
2 Year Labor and Parts Warranty
5 Year Compressor Warranty
MBF8006 – Swing Door – 77.8×33.3×82.9
Exterior and Interior Stainless Steel
Dixell Digital Temperature Control System
Heavy Duty Embraco Compressor
Self-closing and Stay open Door
Efficient Refrigeration System
Round Corner Design
Recessed Door Handle
Pre-installed Castors and Shelves
2 Year Labor and Parts Warranty
5 Year Compressor Warranty
PyroCentric™ Burner heads are standard
– Two rings of flame for even cooking no matter the pan size
– PyroCentric™ 32,000 BTU (9 KW) anti-clogging burner with a 7,000 BTU/hr. (2 KW) low simmer feature
Lift-off front grates
– 12″ x 11″ (305 x 279 mm) size
– Heavy-duty cast iron construction
– Anti-clogging pilot shield protects the pilot from grease and debris
– Grate actually provides the shield
– Pots slide easily from section to section and onto the landing ledge
– 12″ x 12″ (305 x 305 mm) size for Step-up Range models
Lift-off backgrates
– 12″ x 13″ (305 x 330 mm) size back grate
– Sized for positioning large stock pots directly over burner
– Features a hot air dam that deflects heat onto the stock pot, not the backguard
– 12″ x 12″ (305 x 305 mm) size for Step-up Range models
Burners located outside the frypot
– Flame heats stainless steel plates located strategically outside of the frypot
– Intense heat rapidly heats stainless steel sides and oil inside
– 175,000 BTU (51 KW) total gas output
– No tube fired burners and no air shutter adjustments needed
– Snap acting thermostat has a 200° F – 400° F (93° C-204° C) temperature range
– Heats oil quickly
– Extends oil life producing a uniformly cooked product
– 100% safety shut-off valve
Burner system
– 15,000 BTU (4 KW) stainless steel burners
– Burners located every 6″ (152 mm)
– Cast iron radiants for maximum heat retention
– Intense surface temperatures
Three bar grate top
– 3″ x 21″ (76 x 533 mm) sections
– Reinforced cast iron construction
– Each top grate blade has a cast-in grease gutter
– Remove for cleaning
Drip Pan
– Full width drip pan
– Removes easily for cleaning
Tube fired fryers
– Large heat transfer area heats oil quickly
– Produces a better tasting product
– Less oil absorption
– Fast recovery to desired temperature
– 140,000 BTU (41 KW) total output
Large cool zone
– Captures particles
– Holds particles out of the fry zone
– Reduces taste transfer
– Each frypot has a 25 lb. (14 L) oil capacity
Infra-red burner
– Burner provides instant, even heating
– 20,000 BTU (6 KW) ICMA-24 model
– 40,000 BTU (12 KW) ICMA-36 model
– 40,000 BTU (12 KW) ICMA-48 model
– 60,000 BTU (17 KW) ICMA-60 model
– 70,000 BTU (21 KW) ICMA-72 model
– 80,000 BTU (23 KW) ICMA-84 model
– Protective screen over infra-red burner
– Individual left / right gas controls (except on ICMA-24) model
– Adjustable gas valve
– Continuous pilot
Tube fired fryers
– Large heat transfer area
– Millivolt temperature control circuit
– Snap acting thermostat has a 200° F – 400° F (93° C-204° C) temperature range
– Heats oil quickly
– Better tasting product
– Less oil absorption
– Fast recovery to desired temperature
– 140,000 BTU (41 KW) total output
-100% safety shut-off
Tube fired fryers
– Large heat transfer area heats oil quickly
– Produces a better tasting product
– Less oil absorption
– Fast recovery to desired temperature
– 140,000 BTU (41 KW) total output
Large cool zone
– Captures particles
– Holds particles out of the fry zone
– Reduces taste transfer
– Frypot has a 50 lb. (27 L) oil capacity
Filtering saves money
– Reduces product spoilage and waste
– Reduces operating costs
– Improves product consistency
– Improves quality output
Filter package choices
– Up to six fryers can be batteried into one fryer / filter system
– Available for 50 and 75 lb. (27 and 41 Liters) oil capacity fryers
– Available with Snap Action Thermostat, Electronic Thermostat or Computer Control
Radiant broiler features
– Individually controlled 15,000 BTU/hr. (4 KW) burners
– Stainless steel burners located every 6″ (152 mm)
– Removable reinforced cast iron radiants prevent clogging and provide even broiling
– Cast iron top grates provide attractive char-broiler markings
– Slanted cooking surface provides a range of cooking temperatures
– Full width grease gutter
– Large capacity removable drip pan
Grate sections
– 3″ x 22″ (76 x 559 mm) sections remove easily and safely for cleaning
– Each top grate blade has a cast-in grease trough
– Trough directs excess fat to the front grease gutter minimizing flare-up
PyroCentric™ Burner heads are standard
– Two rings of flame for even cooking no matter the pan size
– PyroCentric™ 32,000 BTU (9 KW) anti-clogging burner with a 7,000 BTU/hr. (2 KW) low simmer feature
Optional burner heads
– Optional, interchangeable Saute and Wok Jet burner heads
Lift-off front grates
– 12″ x 11″ (305 x 279 mm) size
– Heavy-duty cast iron construction
– Anti-clogging pilot shield protects the pilot from grease and debris
– Grate actually provides the shield
– Pots slide easily from section to section and onto the landing ledge
– 12″ x 12″ (305 x 305 mm) size for Step-up Range models
Burners located outside the frypot
– Flame heats ceramic plates located strategically outside of the frypot
– Intense heat rapidly heats stainless steel sides and oil inside
– 114,000 BTU (33 KW) total gas output
– No tube fired burners and no air shutter adjustments needed
– Snap acting thermostat has a 200° F – 400° F (93° C-204° C) temperature range
– Heats oil quickly
– Extends oil life producing a uniformly cooked product
– 100% safety shut-off valve
Burner system
– 15,000 BTU (4 KW) stainless steel burners
– Burners located every 6″ (152 mm)
– Cast iron radiants for maximum heat retention
– Intense surface temperatures
Three bar grate top
– 3″ x 21″ (76 x 533 mm) sections
– Reinforced cast iron construction
– Each top grate blade has a cast-in grease gutter
– Remove for cleaning
Drip Pan
– Full width drip pan
– Removes easily for cleaning
PyroCentric™ Burner heads are standard
– Two rings of flame for even cooking no matter the pan size
– PyroCentric™ 32,000 BTU (9 KW) anti-clogging burner with a 7,000 BTU/hr. (2 KW) low simmer feature
Optional burner heads
– Optional, interchangeable Saute and Wok Jet burner heads
Lift-off front grates
– 12″ x 11″ (305 x 279 mm) size
– Heavy-duty cast iron construction
– Anti-clogging pilot shield protects the pilot from grease and debris
– Grate actually provides the shield
– Pots slide easily from section to section and onto the landing ledge
– 12″ x 12″ (305 x 305 mm) size for Step-up Range models
Immersed Elements
– Immersed elements are a lower cost electric alternative
– Elements located inside the stainless steel frypot, below fry zone
– 15.25 KW total output
Large cool zone under element
– Captures particles under element
– Holds particles out of the fry zone
– Reduces taste transfer
– Frypot has a 50 lb. (27 L) oil capacity
Reviews
There are no reviews yet.